Fireproof gypsum board
Fire proof plasterboard,gypsum board
|Edge:||Square Edge or Tapered Edge|
|Port:||Qingdao or Lianyungang|
Fire Resistant Gypsum Board/Fire proof plasterboard
Fire proof plaster board consist of gypsum core mixed with glass fiber chopped strands and fire resistant expansion additives, firmly bonded to heavy duty Kraft paper liner on either side, increasing its strength and providing fire resistance property. The addition of glass fiber and fire resistant additives in the gypsum core improves the cohesive properties and significantly enhances the fire integrity performance when compared to that of the Regular gypsum plaster boards. In case of fire，fire proof gypsum board could effectively block the flame,protect lift and property,obtain precious time to escape.
Huaqin fire proof gypsum board are widely used in civil, commercial, industrial ceiling system, partition system and veneer system.
Pure nature gypsum powder as raw material, use of advanced technology and equipment, fire resistant glass fiber added in the process of gypsum core board. All of this ensure the high quality of fire resistant gypsum board.
While adding a certain amount of the flame retardant, increases the strength of fire proof gypsum board at high temperatures.
|Container||Size||Load Qty||Total Sqm|
experience and strict quality control. We can ensure that consumers receive high-quality
products.All our inspectors accept quality inspection training regularly, they will make
strictly check in each process, from beginning to pack, until loading container.
1.Before the start of the production, QC will check the Initial setting time and the strengh of gypsum powder,
after all index qualified then arrange production.
2.During the production process,QC will measure the thickness, width , length and the
taped edge,to make sure all the data up to the standard quality;
3.QC check the dry heating system weather normally or not during production，to make sure the heating system
maintain a constant temperature，so that the board will not be overburnt or wave plate.
4.When board complete production from line, QC will recheck its size, thickness, weight
5.QC will make full inspection when workers packed board, select unqualified boards ,
and ship out all the high quality boards to every customer.
6.QC will supervise the whole loading process, make sure there is no damaged during