Gypsum Ceiling Board
Gypsum Ceiling Board,drywall ceiling board
|Edge:||Square Edge or Tapered Edge|
|Port:||Qingdao or Lianyungang|
Space that suits you. Space that’s cleaner, brighter and warmer. Space that’s easier – and cheaper – to heat and light. Create your ideal space. Install a suspended ceiling.
Suspended ceilings are about far more than...well, ceilings. They’re about how you make a room a more effective, safer, more economical space to be.
A versatile ceiling board that can be used for a taped and jointed ceiling, a flush plastered ceiling and a ceiling with an H-Strip/Cover Strip finish.
7mm and 9mm thickness standard plasterboard are often used in suspended ceiling system, especially in South Africa. But now, 8mmTE board can be used for all plaster ceiling applications including flush plaster grid,steel, and bulkhead construction.
8mm Multi Purpose Plasterboard
which is available in widths of 1.0m instead of the conventional 900 & 1200mm widths using a metric basis as opposed to the traditional imperial converted measurements making material take offs and calculations far easier.
The boards are also significantly easier to handle due to the narrower width and lighter weight and require at least one person less when installing.
High quality Hongye plaster board used for ceiling tiles has many sizes available:
|Edge||TE or SE|
|Container||Size||Load Qty||Total Sqm|
experience and strict quality control. We can ensure that consumers receive high-quality
products.All our inspectors accept quality inspection training regularly, they will make
strictly check in each process, from beginning to pack, until loading container.
1.Before the start of the production, QC will check the Initial setting time and the strengh of gypsum powder, after all index qualified then arrange production.
2.During the production process,QC will measure the thickness, width , length and the
taped edge,to make sure all the data up to the standard quality;
3.QC check the dry heating system weather normally or not during production，to make sure the heating system maintain a constant temperature，so that the board will not be overburnt or wave plate.
4.When board complete production from line, QC will recheck its size, thickness, weight
5.QC will make full inspection when workers packed board, select unqualified boards ,
and ship out all the high quality boards to every customer.
6.QC will supervise the whole loading process, make sure there is no damaged during