PVC Calcium Silicate Tile
PVC calcium silicate ceiling tiles,calcium silicate ceiling
|Port:||Qingdao or Lianyungang|
Huaqin PVC laminated calcium silicate board is a combination of PVC film, calcium silicate board and insulation aluminum foil to provide you distinctive elegance to your interiors.
Calcium silicate board is an asbestos free insulating material reinforced with inorganic fiber designed to provide excellent thermal and heat resistance, fire and sound insulation for a wide range of decoration requirements. After laminate PVC film, PVC calcium silicate ceiling tile are widely used and hot sales in all over the world because of it’s moisture resistance, superior strength, and thermal insulation.
physical performance of base board: calcium silicate board:
Raw Materials: Tobermorite, Cement, Quartz, Fiber
Moisture Content: ≤12%
Water Absorbing Capacity: ≤60%
Thermal Conductivity: Average≤0.20W/MK
Bending Strength: Transverse≥8.5N/mm3 Vertical≥6.0N/mm3
Cross and Parallel Strength Ratio: ≥58%
Radioactivity: Conforming to GB6566-2001 A Class
Fire Resistance: In-combustibility A Class(GB8624-A)
physical performance of aluminum foil:
Back aluminum foil is a single-sided foil facing that is comprised of 7μm aluminum foil bonded to natural kraft paper with a flame retardant adhesive and is reinforced with tri-directional fiberglass scrim. Aluminum foil is intended for use as an attic, roof, or wall radiant barrier and as a class A insulation facing. The product also can be used as an effective vapor barrier.
PVC Calcium Silicate Ceiling tile sizes:
595x595x5mm, 595x595x6mm, 595x1195x5mm, 595x1195x6mm
(size and thickness according to the customer requirements)
experience and strict quality control. We can ensure that consumers receive high-quality
products.All our inspectors accept quality inspection training regularly, they will make
strictly check in each process, from beginning to pack, until loading container.
1.Before the start of the production, QC will check the Initial setting time and the strengh of gypsum powder, after all index qualified then arrange production.
2.During the production process,QC will measure the thickness, width , length and the
taped edge,to make sure all the data up to the standard quality;
3.QC check the dry heating system weather normally or not during production，to make sure the heating system maintain a constant temperature，so that the board will not be overburnt or wave plate.
4.When board complete production from line, QC will recheck its size, thickness, weight
5.QC will make full inspection when workers packed board, select unqualified boards ,
and ship out all the high quality boards to every customer.
6.QC will supervise the whole loading process, make sure there is no damaged during